KWL 250 W ET

KWL 250 W ET

Ventilation unit R/L with heat recovery EC-motors, Enthalpy heat exchanger Automatic bypass and Web-server

Ref.-No. 40150

Features

Compact unit with heat recovery for wall mounting, with enthalpy heat exchanger. Can be used as central ventilation e.g. for apartment buildings and flats. Universal casing for mounting the intake air connection either on the left or on the right. Casing made of galvanised sheet steel, powder-coated white, inner body made of EPP. Free access to the components through removable front door. Easy-to-install connection of intake air and exhaust air, as well as extract air and supply air through casings with DN 125 mm (accessory: connector with seal RVBD). Condensate connection on the underside of the unit, delivery includes ball siphon. Connection to drain pipe on site. Two low-noise high-performance centrifugal fans with energy-saving EC motors for extract and supply air ducting. Heat recovery by means of highly efficient, large-area enthalpy heat exchanger for heat and moisture recovery made of polymer membrane foil. Automatic summer bypass incl. heat exchanger cover. Filter equipment: ISO Coarse 65% (G4) filter for fresh air and extract air as standard; an ISO ePM1 50% (F7) fine filter is available as an option, which can also be integrated into the unit. Tool-free filter change possible. The unit is equipped with a latest Helios easyControls3 control system. The unit can be operated either via an external control element (accessories: KWL-BE ECO, -BE Touch bl, -BE Touch wh) or via the integrated LAN interface using a PC/laptop or mobile devices. Operation is also possible on the move via the cloud. The humidity sensor installed as standard and other optionally available external air quality sensors (accessories: KWL-CO2 Modbus EC3, -FTF Modbus EC3, -VOC Modbus EC3) enable automatic, demand-controlled ventilation. The integrated Modbus/RTU interface or an optional KNX module (accessory: KWL-KNX Connect) is available for connection to building management systems. Frost protection is monitored as standard by controlling the supply air flow rate and an optional electrical pre-heater that can be integrated into the unit (accessory: KWL-EVH 250 W).

Technical Data

General Information
Ref.-No.:40150
Type:KWL 250 W ET
Flow rate free-blowing:302 m³/h
Voltage:230 V , 50 Hz
Rated current (FLC) uncontrolled:1.5 A
Nominal power:100 W
Max. air flow temperature:40 °C
IP protection category:34
Connect diameter:125 mm
Weight:47,00 kg
Unit design:universal
Installation position:wall
Heat exchanger:plate heat exchanger
ErP-SEV:A
ErP-Vmax:245 m³/h
ErP-Vref:0,048 m³/s
ErP-ηt::85 %
Wiring diagram no.:1433

Vom Schwarzwald in die ganze Welt.

Wir bringen frische, gesunde Luft vom Schwarzwald in die Welt. Als international tätiges Unternehmen legen wir hierbei sehr viel Wert auf die individuellen Bedürfnisse der einzelnen lokalen Märkte und optimieren unsere Services kontinuierlich. In ausgewählten Ländern betreiben wir eigene Niederlassungen. Über die enge Zusammenarbeit mit geschulten Vertriebspartnern sind wir ebenfalls breit aufgestellt. In den letzten Jahren konnten wir weitere Märke erschließen und exportieren heute in über 60 Länder – und es kommen jedes Jahr neue hinzu. 

Helios Standorte in Europa.

Helios Ventilatoren GmbH + Co KG
Lupfenstraße 8
78056 Villingen-Schwenningen - DE

Tel.: +49 (0) 7720 / 606-0
Fax: +49 (0) 7720 / 606-166
E-Mail:  

Helios Ventilatoren Ges. mbH
Siemensstrasse 15
6063 Rum/Innsbruck

Tel.: +43 (0) 512/26 59 88
Fax: +43 (0) 512/26 59 88 – 85
E-Mail:

Helios Ventilatoren AG
Tannstrasse 4
8112 Otelfingen

Tel.: +41 (0)44 735 36 36
Fax: +41 (0)44 735 36 37
E-Mail:

Helios Ventilateurs
9 rue du gibier
67120 Molsheim

Tel.: +33 (0)3 90 40 48 48
Fax: +33 (0)6 78 03 12 50
E-Mail:

Helios Ventilation Systems
5 Crown Gate, Wyncolls
RoadSeveralls Industrial Park
Colchester, Essex CO4 9HZ

Tel.: +44 (0)1206 228 500
Fax: +44 (0)1206 228 501
E-Mail: